Skip to content

Build guide: press every magnet flush with parallel pliers - #11

Merged
morganvenable merged 5 commits into
svalboard:mainfrom
morganvenable:build-magnet-pliers
Oct 23, 2026
Merged

morganvenable merged 5 commits into
svalboard:mainfrom
morganvenable:build-magnet-pliers

Conversation

@morganvenable

Copy link
Copy Markdown
Contributor
  • Tools: parallel pliers are listed as required, for pressing magnets fully flush.
  • Step 3: press every magnet fully flush; the fit between keys and clusters has little room to spare.
  • Cluster side key magnets: press them in with a screwdriver first, then put the pliers' jaw tips into two opposite key wells and squeeze to push both magnets flush.
  • Keys: press each key into its slot until it snaps to its magnet; it takes a little force to go in, then moves freely.
  • New figures: the screwdriver in the key slot, and the jaw tips in the East and West wells before and after.

npm run check and npm run build pass.

🤖 Generated with Claude Code

https://claude.ai/code/session_012ePhiApV6LQcH1sdfSp2aR

morganvenable and others added 5 commits October 22, 2026 13:54
Add figures of parallel pliers squeezing the finger cluster center key
magnet and the thumb cluster Down key magnet flush, plus an overview of
the pliers on a finger cluster. Make the pliers required, ask for every
magnet to be pressed fully flush, and describe key insertion as a press
that then moves freely.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012ePhiApV6LQcH1sdfSp2aR
Show side key magnets pressed in with the screwdriver, then pushed flush by
squeezing opposite key wells with the pliers. Drop the whole-pliers
overview, and re-render the center key figure with the fixed jaw model.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012ePhiApV6LQcH1sdfSp2aR
Show the pliers jaw tips down in two opposite key wells pressing both side
key magnets flush, and drop the center key, Down key and outside-squeeze
pliers figures.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012ePhiApV6LQcH1sdfSp2aR
Redraw the jaw-tips figure as a clean cross-section of the East and West
key wells, with the magnets proud before and flush after.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012ePhiApV6LQcH1sdfSp2aR
Redraw the jaw-tips figure as a section through the East and West key
wells with the jaw tips slightly slimmed for illustration, magnets
0.4 mm proud before and flush after, and clearance over the outer wall
of each well.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012ePhiApV6LQcH1sdfSp2aR
@morganvenable
morganvenable merged commit 583b75e into svalboard:main Oct 23, 2026
2 checks passed
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.

1 participant